Edge Sculpture

This adorable Field Mouse is painted in the original colourway and is probably one of the cutest pieces Matt Buckley has ever sculpted. Height: 7.4 Inches Width: 5.1 Inches Depth: 4.4 Inches Edge Sculptures are made in a small studio in Shropshire, by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.  

This adorable Field Mouse is one of the cutest pieces Matt Buckley has ever sculpted. Height: 7.4 Inches Width: 5.1 Inches Depth: 4.4 Inches Edge Sculptures are made in a small studio in Shropshire, by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.  

Due in End March/Early April, can be pre-ordered by calling our shop 01284 700288 This perfect miniature of the larger Giraffe Sculpture is presented in a lovely matt black lidded box, with a silver foil logo, making it a fabulous gift to give or to keep for yourself! Height: 185mm (7.3 inches) Width: 102mm (4 inches) Depth: 100mm (3.9 inches) Most of the Edge Sculptures are designed to be a focal point in a room and hence tend to be quite large and dramatic statement pieces, which many people can't easily accommodate. Over the past few years the designer, Matt Buckley, has been working on ways to not just sculpt smaller pieces but instead to explore the possibilities of turning what is a very large piece into a perfectly miniaturised version of the original. The intention was to create the miniature using the very same Dolomite marble based stone casting material and to also hand paint the piece in the very same way as well. It has been a challenge, making minor adjustments along the way, but he's done it and the initial collection of 6 pieces is to be augmented with another 4 in the Spring of 2025.

Due in End March/Early April, can be pre-ordered by calling our shop 01284 700288 This perfect miniature of the larger Penguin Sculpture is presented in a lovely matt black lidded box, with a silver foil logo, making it a fabulous gift to give or to keep for yourself! Height: 142mm (5.6 inches) Width: 92mm (3.6 inches) Depth: 68mm (2.7 inches) Most of the Edge Sculptures are designed to be a focal point in a room and hence tend to be quite large and dramatic statement pieces, which many people can't easily accommodate. Over the past few years the designer, Matt Buckley, has been working on ways to not just sculpt smaller pieces but instead to explore the possibilities of turning what is a very large piece into a perfectly miniaturised version of the original. The intention was to create the miniature using the very same Dolomite marble based stone casting material and to also hand paint the piece in the very same way as well. It has been a challenge, making minor adjustments along the way, but he's done it and the initial collection of 6 pieces is to be augmented with another 4 in the Spring of 2025.

Due in End March/Early April, can be pre-ordered by calling our shop 01284 700288 This perfect miniature of the larger Spartan Bust, which is now retired, is presented in a lovely matt black lidded box, with a silver foil logo, making it a fabulous gift to give or to keep for yourself! Height: 175mm (6.9 inches) Width: 73mm (2.9 inches) Depth: 78mm (3.1 inches) Most of the Edge Sculptures are designed to be a focal point in a room and hence tend to be quite large and dramatic statement pieces, which many people can't easily accommodate. Over the past few years the designer, Matt Buckley, has been working on ways to not just sculpt smaller pieces but instead to explore the possibilities of turning what is a very large piece into a perfectly miniaturised version of the original. The intention was to create the miniature using the very same Dolomite marble based stone casting material and to also hand paint the piece in the very same way as well. It has been a challenge, making minor adjustments along the way, but he's done it and the initial collection of 6 pieces is to be augmented with another 4 in the Spring of 2025.

Due in End March/Early April, can be pre-ordered by calling our shop 01284 700288 This perfect miniature of the larger Tyrannosaurus Rex Bust is presented in a lovely matt black lidded box, with a silver foil logo, making it a fabulous gift to give or to keep for yourself! Height: 155mm (5.7 inches) Width: 75mm (3 inches) Depth: 137mm (5.4 inches) Most of the Edge Sculptures are designed to be a focal point in a room and hence tend to be quite large and dramatic statement pieces, which many people can't easily accommodate. Over the past few years the designer, Matt Buckley, has been working on ways to not just sculpt smaller pieces but instead to explore the possibilities of turning what is a very large piece into a perfectly miniaturised version of the original. The intention was to create the miniature using the very same Dolomite marble based stone casting material and to also hand paint the piece in the very same way as well. It has been a challenge, making minor adjustments along the way, but he's done it and the initial collection of 6 pieces is to be augmented with another 4 in the Spring of 2025.

This Baby Chimpanzee was the first one of a series of 3. This one is Hear No Evil, so we imagine you can work out what the other two are. This one was launched in 2021 and it's two brothers were launched in 2022. Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.   Height 200mm - 7.9 inches Width 175mm - 6.9 inches Depth 178mm - 7 inches

Another masterpiece from Edge Sculpture, this Giraffe Calf is another cutie. Who would not love to own this little gem? Perfect quietly sitting on it's own or pair it with it's mum, the Edge Giraffe Bust. A great gift for any animal lover!   Height 11.5" (292mm) Width 9.4" (240mm) Depth 7.5" (190mm) Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

This Edge Sculpture Baby Gorilla is cute with a bit of an edge to it. Designed to fit with the big Edge Gorilla, maybe not so grumpy now as he has a little one to protect or to sit with the other original Edge Sculpture Baby Orangutan. Happy on his own too! Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 232mm - 9 inches Width - 190mm - 7.5 inches Depth - 113mm - 4.5 inches

It's not often you can say that a Rhino is cute, but this White Rhinocerus Calf is exactly that......oozing cuteness!!! A special gift for anyone who loves an African animal. Height 9.7" (247mm) Width 12.2" (310mm) Depth 7.3" (185mm) Edge Sculptures are made in a small studio in Shropshire, by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

The perfect American Eagle! Edge Sculptures are made in a small studio in Shropshire, by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 372mm Width - 310mm Depth - 170mm

A fabulous African Chameleon, complete with lunch! This is the new rainbow blue colourway, but of course Chameleons can take on the colour of their surroundings and blend in, to hide in plain sight. Can be placed next to the African Tree Frog to create a wildlife scene. Height 13.2" (335mm) Width 13.8" (350mm) Depth 6.1" (155mm) Edge Sculptures are made in a small studio in Shropshire, by artist Matt Buckley and team. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.