Edge Sculptures

The Edge Sculpture Angel is a new piece for Spring 2020. Painted in pastel hues, it has a slight retro feel to it. A very feminine piece. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 16.1 inches (410mm) Width 12.8 inches (325mm) Depth 9.4 inches (240mm)

This brand new Edge Sculpture Baby Gorilla is cute with a bit of an edge to it. Designed to fit with the big Edge Gorilla, maybe not so grumpy now as he has a little one to protect or to make a three-some with the two baby Edge Orangutans, Baby Oh! and the original Edge Sculpture Baby Orangutan. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 232 mm 9" Width - 190 mm 7.5" Depth - 113 mm 4.5"

The baby Orangutan fits in the arms of the full sized Orangutan, making it the perfect companion. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height: 7.5 inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)

So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)

So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)

So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)

This adorable little Elephant Calf is the third in the Elephant series by Matt Buckley. Sat playfully, this cute baby will make the perfect addition to any home. Also, its been said that the higher an Elephants trunk is raised, the more luck it brings! These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 25.4cm - 10 inches Length - 22.8cm - 9 inches Depth - 16cm - 6.3 inches

Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 9.25 inches (235mm) Length 15.5 inches (394mm) Depth 7 inches (178mm)

Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 9.25 inches (235mm) Length 15.5 inches (394mm) Depth 7 inches (178mm)

This Edge Sculpture Fox Bust is a true gentleman, a real dapper fox. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 410mm (16") Width 330mm (12.5") Depth 300mm (12")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 11.5 - inches Length 5.5 - inches Depth 13 - inches

The Heraldic Dragon comes complete with a metal stand. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 580mm (22.5’’) Length - 470mm (18.5’’) Depth - 23mm (9’’)

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns Height 335mm - 14 inches Length 550mm - 21.5 inches Depth 295mm - 11.5 inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 360mm (14") Width 300mm (12") Depth 275mm (11")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, giving an air of individuality to every piece. In early 2018, Matt developed his first miniature piece, the Baby Orangutan. Proving to be more popular than Matt had ever hoped, he's continued the miniature theme with this stunning Tiger Cub. Height - 180mm - 7" Length - 245mm - 9.6" Depth - 130mm - 5"

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. H 380mm (15") L 320mm (12.5") D 170mm (7")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 355mm (14") Width 330mm (13") Depth 330mm (13")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

This baby orangutan from Edge Sculpture is a very special piece, as we have donated £18 + VAT for each one sold, to The Jim Cronin Memorial Fund, a charity set up to help primates. We thought that the original Baby Orangutan was cute, but we think that Baby Oh! is even cuter, if that's possible! Not only is it gorgeous and a charity is benefitting from the sales, but the little chaps are numbered and signed on the base too and come with a certificate of authenticity. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 7.3 inches (18.5cm) Width - 7.1 inches (18 cm) Depth - 5.7 inches (14.5cm) approx.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 372mm Width - 310mm Depth - 170mm

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches

Considered to be one of our closest relatives, this cheeky chap could remind you of someone you know maybe? These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 295mm (11.5") Width - 305mm (12") Depth - 275mm (10.75")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

A stunning feature piece for any decor, this Elephant Bust comes with a metal stand, with assembly required as the ears are separate in the box. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 18.5 inches (475mm) Length 26.5 inches (680mm) Depth 27.5 inches (700mm) Height inc. metal base - 540mm (21”) Metal wall bracket also available to purchase, please contact us for details.

This majestic Giraffe bust will capture the attention of all who walk into the room. Holding his head up high, this piece fits right in the contemporary design of Edge Sculpture. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 21.5 inches (54.7cm) Width - 10.6 inches (27cm) Depth - 12 inches (30.5cm)

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height: 515mm (20.25 inches) Length: 330mm (13 inches) Depth: 195mm (7.75 inches) All measurements are approximate.

Rearing up on it's hind legs, this magnificent Horse is poised to perfection. A great gift for any equine lover, unless purchasing for yourself! These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height -13 inches Width - 11 inches Depth - 5.5 inches