Skip to content

Figures

Edge Sculpture Baby Orangutan Edge Sculpture Baby Orangutan
£110.00
In stock
The baby Orangutan fits in the arms of the full sized Orangutan, making it the perfect companion. Equally, he's at home on his own too! Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 207mm - 8.1 inches Width 140mm - 5.5 inches Depth 92mm - 3.6 inches
Edge Sculpture Bull Terrier: Red Edge Sculpture Bull Terrier: Red
£370.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Cat Sitting: Tabby Edge Sculpture Cat Sitting: Tabby
£195.00
In stock
So realistic, this cat will sit by your feet, protective and proud. The colourway of this Edge Tabby Cat is rather muted, so will fit any decor scheme. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)
Edge Sculpture Gorilla Sitting Edge Sculpture Gorilla Sitting
£390.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches
Edge Sculpture Hare Small Edge Sculpture Hare Small
£115.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 11.5 - inches Length 5.5 - inches Depth 13 - inches
Edge Sculpture Panda Cub Edge Sculpture Panda Cub
£130.00
In stock
Don't you just want to cuddle this gorgeous new sculpt from Edge Sculpture. The Panda Cub is so realistic and measures: Height 9.35" (235mm) Width 6.9" (175mm) Depth 7" (178mm) Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Robin Edge Sculpture Robin
£130.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 210mm - 8.3 inches Length 160mm - 6.3 inches Depth 150mm - 5.9 inches
Edge Sculpture Tiger Cub Edge Sculpture Tiger Cub
£120.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, giving an air of individuality to every piece. In early 2018, Matt developed his first miniature piece, the Baby Orangutan. Proving to be more popular than Matt had ever hoped, he's continued the miniature theme with this stunning Tiger Cub. Height - 180mm - 7" Length - 245mm - 9.6" Depth - 130mm - 5"
Edge Sculpture Baby Gorilla Edge Sculpture Baby Gorilla
£120.00
In stock
This Edge Sculpture Baby Gorilla is cute with a bit of an edge to it. Designed to fit with the big Edge Gorilla, maybe not so grumpy now as he has a little one to protect or to sit with the other original Edge Sculpture Baby Orangutan. Happy on his own too! Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 232mm - 9 inches Width - 190mm - 7.5 inches Depth - 113mm - 4.5 inches
Edge Sculpture Orangutan Edge Sculpture Orangutan best
£315.00
In stock
The Edge Sculpture Orangutan has such a lovely gentle face. Happy on her own or with Baby Orangutan in her arms. Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns Height 335mm - 14 inches Length 550mm - 21.5 inches Depth 295mm - 11.5 inches

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.