Decor

The baby Orangutan fits in the arms of the full sized Orangutan, making it the perfect companion. Equally, he's at home on his own too! Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 207mm - 8.1 inches Width 140mm - 5.5 inches Depth 92mm - 3.6 inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches

A pet for many, but for most, a member of the family. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 490mm - 19.3 inches Length 330mm - 13 inches Depth 490mm - 19.3 inches

Considered to be one of our closest relatives, this cheeky chap could remind you of someone you know maybe? These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 295mm (11.5") Width - 305mm (12") Depth - 275mm (10.75")

This Edge Sculpture Fox Bust is a true gentleman, a real dapper fox. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 410mm (16") Width 330mm (12.5") Depth 300mm (12")

Edge Sculpture Limited Edition British Bulldog - English Mustard This Edge Sculpture is from the Limited Edition Bulldog Walk range.  The range has 7 different colourways and just 50 of each have been made. This one is called English Mustard.  It is signed and numbered by Matt inside the sculpture and it also comes with a numbered certificate of authenticity. This bust measures height - 32cm, length - 29cm, Depth - 28cm Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

The Edge Sculpture Orangutan has such a lovely gentle face. Happy on her own or with Baby Orangutan in her arms. Edge Sculptures are made in a small studio in Shropshire, designed by artist Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns Height 335mm - 14 inches Length 550mm - 21.5 inches Depth 295mm - 11.5 inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, giving an air of individuality to every piece. In early 2018, Matt developed his first miniature piece, the Baby Orangutan. Proving to be more popular than Matt had ever hoped, he's continued the miniature theme with this stunning Tiger Cub. Height - 180mm - 7" Length - 245mm - 9.6" Depth - 130mm - 5"

Imagine a whole book on a single sheet. A bold art print on which, up close, you can read the full and complete text of your favourite classic work. Every paragraph, chapter heading and italic is kept and carefully arranged into a design which fits a standard frame with no words missing. This design comprises a single B1 size sheet measuring 700 x 1000mm. All Spineless Classics are printed on heavyweight paper in sharp, lightfast ink which will not fade.

Imagine a whole book on a single sheet. A bold art print on which, up close, you can read the full and complete text of your favourite classic work. Every paragraph, chapter heading and italic is kept and carefully arranged into a design which fits a standard frame with no words missing. This design comprises a single A0 size sheet measuring 1189 x 841mm All Spineless Classics are printed on heavyweight paper in sharp, lightfast ink which will not fade.