Skip to content

Edge Sculpture

The majority of our Edge Sculptures are Click & Collect only, due to their size and weight. If this causes an issue, please call us and we will endeavour to help you the best we can.


These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, giving an air of individuality to every piece.


Edge Sculptures are an ecclectic mix of themes, which are brought together using the same styling techniques right across the range.

Edge Sculpture Angel Bust Edge Sculpture Angel Bust
£210.00
In stock
The Edge Sculpture Angel is a new piece for Spring 2020. Painted in pastel hues, it has a slight retro feel to it. A very feminine piece. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 16.1 inches (410mm) Width 12.8 inches (325mm) Depth 9.4 inches (240mm)
Edge Sculpture Baby Gorilla Edge Sculpture Baby Gorilla
£115.00
In stock
This brand new Edge Sculpture Baby Gorilla is cute with a bit of an edge to it. Designed to fit with the big Edge Gorilla, maybe not so grumpy now as he has a little one to protect or to make a three-some with the two baby Edge Orangutans, Baby Oh! and the original Edge Sculpture Baby Orangutan. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 232 mm 9" Width - 190 mm 7.5" Depth - 113 mm 4.5"
Edge Sculpture Baby Orangutan Edge Sculpture Baby Orangutan
£105.00
Out of stock
The baby Orangutan fits in the arms of the full sized Orangutan, making it the perfect companion. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height: 7.5 inches
Edge Sculpture Bear Cub Edge Sculpture Bear Cub
£130.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Bull Terrier: Brown Edge Sculpture Bull Terrier: Brown
£350.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Bull Terrier: Bulls-Eye Edge Sculpture Bull Terrier: Bulls-Eye
£350.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Bull Terrier: Red Edge Sculpture Bull Terrier: Red
£350.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Bull Terrier: Tri-Colour Edge Sculpture Bull Terrier: Tri-Colour
£350.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Bull Terrier: White Edge Sculpture Bull Terrier: White
£350.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Cat Sitting: Black & White Edge Sculpture Cat Sitting: Black & White
£185.00
In stock
So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)
Edge Sculpture Cat Sitting: Ginger Edge Sculpture Cat Sitting: Ginger
£185.00
Out of stock
So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)
Edge Sculpture Cat Sitting: Tabby Edge Sculpture Cat Sitting: Tabby
£185.00
In stock
So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)
Edge Sculpture Cat Sitting: White Edge Sculpture Cat Sitting: White
£185.00
Out of stock
So realistic, this cat will sit by your feet, protective and proud. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 375mm (14.75 inches) Width - 300mm ( 11.8 inches) Depth - 215mm (8.5 inches)
Edge Sculpture Elephant Calf Edge Sculpture Elephant Calf
£135.00
Out of stock
This adorable little Elephant Calf is the third in the Elephant series by Matt Buckley. Sat playfully, this cute baby will make the perfect addition to any home. Also, its been said that the higher an Elephants trunk is raised, the more luck it brings! These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 25.4cm - 10 inches Length - 22.8cm - 9 inches Depth - 16cm - 6.3 inches
Edge Sculpture Elephant: Mocha Edge Sculpture Elephant: Mocha
£140.00
Out of stock
Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 9.25 inches (235mm) Length 15.5 inches (394mm) Depth 7 inches (178mm)
Edge Sculpture Elephant: White Edge Sculpture Elephant: White
£140.00
Out of stock
Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 9.25 inches (235mm) Length 15.5 inches (394mm) Depth 7 inches (178mm)
Edge Sculpture Fox Edge Sculpture Fox
£200.00
In stock
This Edge Sculpture Fox Bust is a true gentleman, a real dapper fox. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 410mm (16") Width 330mm (12.5") Depth 300mm (12")
Edge Sculpture French Bulldog Fawn Edge Sculpture French Bulldog Fawn
£175.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Gorilla Sitting Edge Sculpture Gorilla Sitting
£370.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches
Edge Sculpture Hare Small Edge Sculpture Hare Small
£110.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 11.5 - inches Length 5.5 - inches Depth 13 - inches
Edge Sculpture Hedgehog Edge Sculpture Hedgehog
£140.00
In stock
Edge Sculpture Hedgehog This Edge Sculpure features a really cute hedgehog.  He just can't wait for you to give him a tickle. Height 180mm - 7 Inches Width 225mm - 8.8 Inches Depth 230mm - 9 Inches   These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Heraldic Dragon Red Edge Sculpture Heraldic Dragon Red
£299.00
Out of stock
The Heraldic Dragon comes complete with a metal stand. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 580mm (22.5’’) Length - 470mm (18.5’’) Depth - 23mm (9’’)
Edge Sculpture Limited Edition Horse Hi-Ho Silver! Edge Sculpture Limited Edition Horse Hi-Ho Silver!
£150.00
In stock
Edge Sculpture Limited Edition Horse - Hi Ho Silver! This Edge Sculpture is a Limited Edition in a silver colourway and just 50 have been made. It is signed and numbered by Matt underneath the base of the sculpture and it also comes with a numbered certificate of authenticity. Smaller than some of the scuptures in the range, so is easier to place around your home. Height 33cm Width 28cm Depth 12cm Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Orangutan Edge Sculpture Orangutan best
£300.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns Height 335mm - 14 inches Length 550mm - 21.5 inches Depth 295mm - 11.5 inches
Edge Sculpture Owl: Midnight Edge Sculpture Owl: Midnight
£110.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Owl: Tawny Edge Sculpture Owl: Tawny
£110.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Staffordshire Bull Terrier Black Edge Sculpture Staffordshire Bull Terrier Black
£175.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches
Edge Sculpture Staffordshire Bull Terrier Brindle Edge Sculpture Staffordshire Bull Terrier Brindle
£175.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches
Edge Sculpture Staffordshire Bull Terrier Red Edge Sculpture Staffordshire Bull Terrier Red
£175.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches
Edge Sculpture Tiger Bust: Siberian Edge Sculpture Tiger Bust: Siberian
£210.00
Out of stock
Robert Harrop Designs are proud to present a most striking collection of contemporary sculpture. Emotionally evocative, fiercely modern, yet remaining utterly affordable. Designed and sculpted by the Creative Director Matt Buckley at their Shropshire studios, Edge Sculpture is a collection influenced by style rather than subject. The mix of form, light and texture gives a unique feel to each individual piece. They are an eclectic mix of themes that have a collective 'look'. Please note, since they are hand-painted the colour in which you receive may differ slightly to the photos shown. Height 360mm (14") Width 300mm (12") Depth 275mm (11")
Edge Sculpture Tiger Cub Edge Sculpture Tiger Cub
£115.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, giving an air of individuality to every piece. In early 2018, Matt developed his first miniature piece, the Baby Orangutan. Proving to be more popular than Matt had ever hoped, he's continued the miniature theme with this stunning Tiger Cub. Height - 180mm - 7" Length - 245mm - 9.6" Depth - 130mm - 5"
Edge Sculpture Venus Bust: Bronze Edge Sculpture Venus Bust: Bronze
£160.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. H 380mm (15") L 320mm (12.5") D 170mm (7")
Edge Sculpture Venus Bust: Grey Edge Sculpture Venus Bust: Grey
£160.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Venus Bust: Teal Edge Sculpture Venus Bust: Teal
£160.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Wolf Bust: Timber Edge Sculpture Wolf Bust: Timber
£210.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 355mm (14") Width 330mm (13") Depth 330mm (13")
Edge Sculpture Wood Elf: Green Edge Sculpture Wood Elf: Green
£250.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Wood Elf: Grey Edge Sculpture Wood Elf: Grey
£250.00
In stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.
Edge Sculpture Baby Oh! Edge Sculpture Baby Oh!
£110.00
Out of stock
This baby orangutan from Edge Sculpture is a very special piece, as we have donated £18 + VAT for each one sold, to The Jim Cronin Memorial Fund, a charity set up to help primates. We thought that the original Baby Orangutan was cute, but we think that Baby Oh! is even cuter, if that's possible! Not only is it gorgeous and a charity is benefitting from the sales, but the little chaps are numbered and signed on the base too and come with a certificate of authenticity. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 7.3 inches (18.5cm) Width - 7.1 inches (18 cm) Depth - 5.7 inches (14.5cm) approx.
Edge Sculpture Bald Eagle Edge Sculpture Bald Eagle
£175.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 372mm Width - 310mm Depth - 170mm
Edge Sculpture Barn Owl Edge Sculpture Barn Owl
£190.00
Out of stock
These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 420mm - 16.5 inches Length 550mm - 21.8 inches Depth 405mm - 15.9 inches
Edge Sculpture Cat: Black Edge Sculpture Cat: Black
£120.00
Out of stock
This cat stands tall with its tail curled, giving it a Halloween type feel. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 15 - inches Length 13 - inches Depth 9.5 - inches
Edge Sculpture Cat: Ginger Edge Sculpture Cat: Ginger
£120.00
Out of stock
This cat stands tall with its tail curled. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 15 - inches Length 13 - inches Depth 9.5 - inches
Edge Sculpture Cat: White Edge Sculpture Cat: White
£120.00
Out of stock
This cat stands tall with its tail curled. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 15 - inches Length 13 - inches Depth 9.5 - inches
Edge Sculpture Chimpanzee Edge Sculpture Chimpanzee
£175.00
Out of stock
Considered to be one of our closest relatives, this cheeky chap could remind you of someone you know maybe? These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 295mm (11.5") Width - 305mm (12") Depth - 275mm (10.75")

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.