Busts

This Edge Sculpture Fox Bust is a true gentleman, a real dapper fox. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 410mm (16") Width 330mm (12.5") Depth 300mm (12")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

This majestic Giraffe bust will capture the attention of all who walk into the room. Holding his head up high, this piece fits right in the contemporary design of Edge Sculpture. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height - 21.5 inches (54.7cm) Width - 10.6 inches (27cm) Depth - 12 inches (30.5cm)

Edge Sculpture Limited Edition British Bulldog - English Mustard This Edge Sculpture is from the Limited Edition Bulldog Walk range.  The range has 7 different colourways and just 50 of each have been made. This one is called English Mustard.  It is signed and numbered by Matt inside the sculpture and it also comes with a numbered certificate of authenticity. This bust measures height - 32cm, length - 29cm, Depth - 28cm Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.

This is the first time that Edge Sculpture has created an Orangutan Bust, previously doing a full body sculpture and a baby Orangutan. This chap is a real King Louie character, the perfect leader of the Jungle. These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 413mm - 16.2 Inches Width 360mm - 14.2 Inches Depth 295mm - 11.6 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 285mm - 11.25 Inches Width 270mm - 10.5 Inches Depth 225mm - 8.75 Inches

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns. Height 355mm (14") Width 330mm (13") Depth 330mm (13")

These Edge Sculptures are made in a small studio in Shropshire, by an artist called Matt Buckley. Matt sculpts each piece in clay and when he's happy with the design, it then enters the production stage. A mould is made from the original clay sculpt and a small run of each piece is created. These sculptures are cast using a resin, that also contains marble powder, giving the sculpture it's weight and density. This is sometimes known as ceramic polystone. The final step is with the on-site painters, where each one is hand painted, and whilst they follow a paint plan, each has an air of individuality, as there can be very slight variances in the resultant colours and patterns.